This is the appropriate scale for the recommended paper thickness. The socket-outlet shall be near the equipment and it shall be easily accessible. All our POS products are suitable for retail, hospitality, healthcare, government, restaurants, warehouses, logistics, manufacturing and more. The printer will print all the codes it receives in a two-column format. External AC Adapter Rated input: For driving the auto cutter of the receipt section, take the interval as a minimum of 10 lines of printing or paper feeding to prevent small pieces of cut paper from dropping into the auto cutter.
|Date Added:||20 April 2017|
|File Size:||61.32 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This can give you a warning when the paper is almost out. Insert the paper roll as shown.
SAM4S ELLIX-10 Thermal POS Printer Series
Push the knob Near-End sensor up to scale 4 or 5. Be sure to allow the printer elix to cool down after printing before cleaning it. It does, however, offer some settings for users with special requirements.
The first column contains the hexadecimal codes and the second column gives the ASCII characters that correspond to the codes. Plug the interface connector into the serial port on the printer.
SAM4S ELLIX Thermal POS Printer Series Online – WishAPOS Australia
Change the setting to the scale 1,2,3,4 and 5. All our POS products are suitable for retail, hospitality, healthcare, government, restaurants, warehouses, logistics, manufacturing and more.
Direct pickups are not available from our warehouses or offices. This equipment has been tested and founded to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Separate the Cover Wire ellix the printer. Do not plug in the power cord. When connecting or disconnecting the power supply from the printer, make sure that ellic power supply is not plugged into an electrical outlet.
Make sure that you use the attached Power supply or equivalent. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly.
CRS | SAM4s Ellix 10 Thermal Printers
Bar code printing is possible by using a bar code command. Connecting the Power Ellkx Use the optional Power supply for your printer. The Near-End sensor is set at adjustment 3. If any items are damaged or missing, please contact your dealer for assistance. Then plug in the external power supply and turn it on if necessary.
Press the FEED button to continue printing. For driving the auto cutter of the receipt section, take the interval as a minimum of 10 lines of printing or paper feeding to prevent small pieces of cut paper from dropping into the auto cutter.
It’s a community-based project which helps to repair anything. Delivery timeframes depend on the delivery location and might take longer in the case of remote or rural areas. Download Brochure Download Specifications.
Remove the used paper roll core if there is one. Be careful of the manual cutter. Low noise thermal printing. Be sure to use paper rolls that meet the specifications.
If the motor knob cannot be rotated, rotate it in the reverse direction to loosen it; then send the DLE ENQ n command. Recovery from the Auto Cutter Error If a foreign object such as a push pin or paper clip drops in the auto cutter and causes the auto cutter to lock wllix, the printer enters an error state. The printer head becomes very hot just after printing and is very dangerous.
If you find that there is not enough paper remaining on the roll when the near-end detector is triggered, you can change the near-end sensor setting.
Make sure that the printer is off.